HolyBro Kopis 4 with Caddx Vista Drone

HolyBro Kopis 4 with Caddx Vista Drone
Free Shipping in the USA. - DJI Caddx Vista version - Pnp means add your own Reciever. TBS, Elrs, or Sbus Receivers. Also may bind to DJI Transmitter 2.
 
*DJI Caddx Vista is compatible with Goggles 2 and prior versions.
 
Only 1 at this price. First come. First Serve!
 
Features 🏆
 
Frame: 3k carbon fiber
Bottom Plate: 2mm
ARM: 3mm
Flight Controller: Kakute F7 mini V3
ESC: Tekko32 F4 4in1 mini 45A ESC
Motor: F1507 KV3800
Propeller: T3140
Buzzer included.
Wheelbase: 180mm
Battery plug: XT30
Recommend battery: 650~850mAh 4s
 
CADDX FPV Specs
VTx: Caddx Vista Kit Digital HD FPV system
Weight:173g(without battery)
 
Specifications
Flight Controller: Kakute F7 mini V3
MCU: STM32F722RET6 32-bit processor,216MHz, 256Kbytes RAM, 512Kbytes Flash
IMU: MPU6000 (SPI)
Barometer: BMP280
USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
5hardware UARTS (UART1,2,3,4,6)
Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not supported.
Onbord 16Mbytes for Blackbox logging
5V Power Out: 1.0A max
3.3V Power Out: 0.2A max
Dimensions: 30x30mm
Mounting Holes: Standard 20mm square to center of holes
Weight: 4g
ESC:
Tekko32 F4 4in1 45A mini
F4 MCU with BLHELI32 firmware
Maximum PWM output upto 96K (default 48K)
Amperage meter scale ratio has been adjusted to 168.
PWM input, TLM supported
Voltage output (VBAT)
NO output BEC
Supports oneshot / Multishot / Dshot PWM
Supports damped light
Supports 3-6S lipo input
Ext. cap needed for 6s (1000uf 35v for 6s usage.)
Mounting holes: 20x20mm(M3)
Size:30 x 39 mm
Weight: 7.2g
Analog version：
5.8G VTx: Atlatl HV Micor
Output Power: 0.5mW (pit mode), 25mW, 200mW, 500mW, 800mW
Audio: 6.5 MHz Mono
Protocol: smart audio2.0
Antenna Connector: MMCX
Input Voltage: 7 to 28 volts (2-6S LiPo)
Dimensions: 30x26mm
Mounting Holes: 20x20mm (M3)
Weight: 3.6g
HD version：
Caddx Polar VistaDigital HD FPV system
Dimensions: Module: 30.45 x 29 x 13mm
Weight: 29g (inc. camera); Module: 19g
Antenna Connector: u.FL
Operating Frequency: 5.725-5.85GHz
Transmitter Power (EIRP)
FCC/SRRC/MIC: <20dBm;       CE: <14dBm
I/O Interface: USB-C, IPEX, 3-in-1 Port
Min. Latency: Low Latency Mode (720p 120fps): 21-28ms
High-Quality Mode (720p 60fps): 30-40ms
Max Transmission Distance: FCC/SRRC: 4km; CE: 0.7km
Input Power: 7.4-26.4vCamera Specifications:
Color: Silver, Brown
Sensor: 1/1.8″ CMOS
Min. Illumination: 0.00003Lux
Lens: F/1.6 & 8 Mega
Shutter: Rolling shutter
ISO: 100-25600
FOV: 162°(D);138°(H);75°(V)
Aspect Ratio: 16:9
Includes:
1x Kopis FPV racing drone
T3140 Propellers
1x Battery strap(installed)
1x Naked GoPro camera mount